As long as the primer is fully cured as per the manufacturers specification, RAPTOR can be applied on top of a properly prepared and sanded 2-part epoxy primer. Can RAPTOR be applied on top of a 2K groundcoat? Yes, the groundcoat must of course be fully cured and properly prepared before applying RAPTOR.
How do you apply Raptor paint?
How do you use Raptor primer?
How much u pol Raptor do I need?
Each kit covers approximately 125 square feet, enough to do a full size pick-up truck bed. Compatible with both Raptor Schutz and Professional Vari-Nozzle application guns. Use for automotive, construction, marine, recreational, industrial, agricultural and commercial applications.
Related Question Does Raptor paint need primer?
What can I use to clean my Raptor liner gun?
Clean gun, equipment and overspray with a lacquer thinner or other acetone based solvent before RAPTOR™ is fully cured. RAPTOR™ Bed Liner and Protective Coating is a very durable coating.
Does Rhino line prevent rust?
"Rhino and Linex will NOT coat over rust" it the product will coat over rust, it the operator should not. It is often applied over a primered body, something the Linex installer does not do, nor is there anyway he can vouch for the quality of that primer paint or the metal under it.
What is Raptor paint used for?
RAPTOR is used for 4x4, automotive restoration, off-road, marine, agricultural machinery and general industry.
How much does a gallon of Raptor liner cover?
The 1 US Gallon Raptor Liner Kit is the industry standard in bed liner coating. Each kit contains four of Raptor and one tin of hardener. Each kit covers approximately 125 square feet, enough to do a full size pick-up truck bed. Compatible with both Raptor Schutz and Professional Vari-Nozzle application guns.
How long before you can walk on Raptor liner?
Baking will speed up the initial cure, but it is still recommended that you wait 2-3 days for light usage and 7 days for heavy duty usage. Flash-off / min @ 68°F Wait 60 minutes between coats. IMPORTANT! Do not place heavy loads on the surface until RAPTOR is fully cured.
How do you Raptor coat a car?
How long does bully liner take to dry?
Allow approx. 1- 2 Hours to “touch dry” between coats. NOTE: DO NOT apply material on too heavy per coat or cracking will occur. Allow each coat to dry to the touch before additional coats.
Does Raptor liner stick to aluminum?
more FAQ's. Can I apply Raptor directly to bare metal, aluminum, galvanized and steel? No – U-POL ACID#8 Etch Primer must be applied first to bare metal surfaces.