Assemble the new strut. Put the new strut into the spring. Make sure to include any rubber parts from the old strut. Install the strut bearing over the spring and install the new strut rod nut to the manufacture specified torque while holding the strut rod to prevent spinning the strut shaft.
How long does it take to install front struts?
It takes about 2 to 3 hours to replace struts. The time to get the struts replaced depends on the skill level of who is replacing them and how rusted the bolts and joints are. When you have worn-out struts, you have to replace them because they can cause more damage.
Can struts be installed backwards?
The shocks cannot be installed backwards, they are completely different. If the rear end is jumping, your shocks are probably completely blown. Look under and see if you can see oil dripping from the shocks.
Do you need a spring compressor to change struts?
The shocks and struts on many vehicles are integrated with springs that can pop off and injure you or damage your vehicle if not removed properly. In such cases, you'll need a spring compressor in order to take everything apart safely.
Related Question how to install front struts
Does it matter which strut goes on which side?
If you're talking about just the shock; no, there is no difference. Toyota parts numbers are goofy; some have specific left/right part numbers, but are actually the same part.
How do you put struts together?
How do you know when your front struts are bad?
The Warning Signs Of Worn Shocks And Struts
Your vehicle never feels completely stable on the highway and is constantly moving up and down. When taking a sharp turn or an off-ramp, your vehicle leans or “tips” to the outside of the turn and feels wobbly. The front end dives more than expected during hard braking.
How do you compress struts to install?
How much should struts cost with labor?
To replace a pair of struts, the total cost on average is between $400 and $1000, including wheel alignment. An individual strut assembly costs approximately $150 to $350, while the labor cost is $100 to $300 for a pair.
How much does Midas charge to replace struts?
|Parts & labor||12 months||$135 – $945|
Why do struts go bad?
Because of a bad strut's loss of tension and support capabilities, rough terrain causes a bad or weakened strut to bounce and shake uncontrollably as vehicle's weight is forced up and down in response to road conditions, conditions a bad strut can no longer handle.
Can you put a left strut on the right side?
Short answer: yes and no. OEM or original equiptment yes it does. Your break line will attach on the R or L side, but some manufacturers put bilateral brackets so is can go on either side.
Why do my new struts make noise?
There is most likely nothing wrong with the replacement shock or strut, but a metallic clunking noise typically indicates loose or worn mounting hardware. A loose mount can allow movement between the bolt and attaching parts, while a mount that is worn can cause the shock/strut to move up and down.
Where is the strut mount located?
Are both front struts the same?
When people speak casually about vehicle suspension, they often throw around the terms “shocks” and “struts” as if they are the same thing, or interchangeable. They're not. Every wheel on your vehicle has either a shock or a strut – never both, never neither.
Are struts universal?
Universal air struts are a great option if we don't offer any bolt on suspension products for your vehicle. Universal struts are not designed for a specific application so modification is going to be required to fit your vehicle.
Are shocks the same on both sides?
Shocks and struts should always be replaced in pairs (front axle or rear axle), and it's even better to replace the shocks/struts on all four wheels at one time. This helps maintain reliable handling and a consistent response on both sides of the vehicle.
What holds a strut in place?
Strut mounts have multiple roles: First, they have to keep struts firmly in place and absorb some of the shocks from road bumps. Second, in some cars front strut mounts have strut mount bearings to allow rotation together with front wheel when turning left or right. Front strut mount.
What are the three basic components of a strut assembly?
Typically, struts consist of a coil spring to support the vehicle's weight, a strut housing to provide structural support for the assembly, and a damping unit within the strut housing to control spring and suspension movement.
How do you lift a strut?
How do new struts feel?
For the first hundred or so miles after installing your new gear, the driver will notice that the suspension feels a little stiff and bouncy. Second, a brand-new passive suspension will feel especially rigid in comparison to a worn-out active suspension.
Do front struts settle?
Springs can settle but if designed correctly settling would be quite small. If the mfgr of the aftermarket springs designed them to the max of the spring wire's yield strength they will settle.
Do struts affect ride height?
Springs or a coil-over suspention are the only factors in ride hight. Struts and or shocks DO NOT AFFECT RIDE HEIGHT only ride quality. Think about it if you put pressure on any set of shocksexcept air adustableit will contract untill there is no more pressure.
Do I need a wheel alignment after replacing shocks?
In general, you don't need an alignment done after replacing shocks on a vehicle with the older style front suspension typically found on rear wheel drive vehicles. Replacing those shocks has nothing to do with the alignment whatsoever unless the spring has lost some of it's tension.