Set the car in park. Go under the vehicle to where the torque converter is visible at the front of the transmission. Loosen and remove the bolts that fasten the torque converter to the fly wheel. The torque converter has three or four "feet" that each has a nut and a bolt to remove plus three or four bolts that tighten directly into the converter.

Can I replace a torque converter myself?

The good news is, if it is just your torque converter that is having issues since it's a self-contained unit, you may not need to replace or rebuild your whole transmission. Torque converters can be serviced or replaced as a single unit.

How long does it take to change out a torque converter?

How long does it take to replace a torque converter? The torque converter itself is relatively inexpensive (between $150 and $350, depending on the vehicle), but 5-10 hours of labor is involved since the transmission must be removed in order to replace the torque converter.

How much should it cost to replace a torque converter?

Most auto repair shops will charge someone anywhere from $600 to $1000 for a torque converter replacement job. If you would rather do the replacement job yourself, then a new torque converter will cost anywhere from $150 to $500.

Related Question how to replace torque converter

Can a bad torque converter ruin a transmission?

A bad torque converter can damage a transmission. Bad torque convertors can lead to damage, overheating, friction, and transmission fluid degradation. If these problems continue, it can cause even more damage to transmission.

Can you fix a bad torque converter?

The good news is, if it is just your torque converter that is having issues since it's a self-contained unit, you may not need to replace or rebuild your whole transmission. Torque converters can be serviced or replaced as a single unit.

How do I know if my torque converter clutch solenoid is bad?

When the torque converter starts malfunctioning, you may feel shuddering and even slipping in overdrive. You usually notice your car shuddering because it feels like it's vibrating. Your car will vibrate even when you're not going very fast. The shuddering makes the car lag and is very noticeable.

Do you have to fill a torque converter before installing?

When installing the converter onto the transmission, please pour approximately one quart of ATF (automatic transmission fluid) into the converter before installing into the transmission. You should experience two distinct drops of the converter into the transmission before it is all of the way in.

How do you remove a torque converter?

Turn the crank from the front crankshaft pulley bolt (CLOCKWISE facing the nose of the engine) a bit, remove a bolt, turn the crank a bit further, remove the next bolt, etc. until all the torque converter bolts are removed.

Does a torque converter spin in park?

It remains stationary when the transmission is in park or neutral; however it spins opposite to the engine rotation when hydraulic pressure (or wind) is provided. Because air would eventually compress when forced to move at a higher speed, the torque converter is sealed and filled with transmission fluid.

Why does my transmission whine when I accelerate?

If any of the gears or bearings in the transmission are worn out, or the transmission fluid is not fully topped , it can cause a transmission whining noise when accelerating. If your car makes noise when accelerating at a low speed, it can be due to faulty transmission, especially if it goes away when you speed up.

Why does my automatic car shudder when I take off?

This is often a sign of low transmission fluid or a faulty transmission control solenoid. As you know, automatic transmissions use pressurized hydraulic fluid to change gears. This type of problem is amplified any time the transmission is low on fluid creating a drop in hydraulic pressure.

What happens when torque converter locks up?

Torque converter lock-up is engaged through a solenoid mounted inside the transmission. This clutch acts just like a clutch disc in a manual transmission application. When the converter is “locked up” this clutch is forced against the front of the converter creating a direct drive from engine to transmission.

How do I know if my converter is stalling?

How do I check the fluid level in my torque converter?

Another method of checking the fluid is to turn off the engine and immediately check the level. This will stop the agitation and give an accurate level (no agitation) before the fluid in the torque converter has had a chance to drain back into the pan area which would give a false-high reading.

How do I stop my transmission from shuddering?

Fortunately, fixing a shuddering transmission is often as simple as getting a transmission flush to replace the contaminated transmission fluid with clean, fresh fluid.

Will a torque converter cause a vibration?

Lockup torque converters were added to many newer-model vehicles to help with fuel economy. However, vibration problems can happen when these torque converters go bad. The vibration felt is known as "lockup shudder" and may occur due to a bad engine or transmission as well.

Will a new torque converter give me more power?

You will not be gaining any horsepower, rather you will be recovering horsepower that would have been normally lost with your stock TC. In addition, a stronger TC will have a higher stall speed. This will allow better launches when you are brake torquing or flashing the TC.

How do you unlock a torque converter?

How To Paint A Car Fender
How Much Does Fuel Injector Replacement Cost