Stiffer bushings will result in a more resistant board, which can be an advantage when performing tricks. For easy movement when cruising or carving the streets, looser bushings are a good option. Bushing tightness depends on each rider's preferences, and bushings can be easily adjusted to suit your needs.
Should I get hard or soft bushings?
Softer bushings are easier for your hanger to compress, and therefore it is easier to turn on softer bushings. Harder bushings result in stiffer turns. Importantly, how tight or loose you keep your bushings also effects your skateboard's turn responsiveness. Harder bushings result in stiffer turns.
What bushings should I use for my weight?
If you are riding at fast freeride and downhill speeds, you may want to get a slightly harder bushing durometer than the weight chart suggests or a more restrictive bushing shape.
LONGBOARD BUSHING DUROMETER CHART.
| Rider Weight | Bushing Durometer |
|---|---|
| <100 lbs | 78-80A |
| 100-125 lbs | 80-82A |
| 125-145 lbs | 82-87a |
| 145-175 lbs | 85-90a |
Are all skateboard bushings the same?
Skateboard bushings are basically divided into two different shapes: tapered, or “cone bushings” and straight, or “barrel bushings.” Note: Cone bushings offer more steer-ability, while barrel bushings make the trucks more stable. Bushings can be combined in a wide variety of ways.
Related Question what bushings should i get
Do bushings make a difference?
Bushings come in pairs. The top bushing on your skateboard truck makes your board turn, the bottom bushing can be adjusted by tightening or loosening the nut to make adjust responsiveness. Loose means better turning but less stability (especially at high speeds) and tight mean more stability but less responsiveness.
Do you need washers for bushings?
For a barrel and stepped bushing combo we'd suggest that you use flat washers beneath the boardside stepped bushings, and cupped or flat washers on the outer end of your roadside barrel bushings. Cupped washers will not work with stepped bushings.
Do Bones bushings fit thunder trucks?
Answer, dont use bones bushings with thunders unless you want to replace them frequently. See, this is what I thought, then I spoke to someone who rides for Bones and said that there was a bad batch of bushings that went out that the bottom ring would get "swallow" by the bottom bushing; washer or not.
Do you need Pivot cups?
A good pivot cup made from a strong, long-lasting material, made to precise tolerances, interacting with a well executed hanger pivot and baseplate, is essential to every longboard. Simply put, the pivot is the heart of how your board skates. Skimp on the pivot, and the rest of the truck will be wasted.
Do Bones bushings fit Independent trucks?
Bones Bushing Hardcore skateboard bushings are used for street, slide, pool, and some longboard skateboards. They fit perfectly in Independent skateboard truck and many more well know skate trucks. The rebound in this bushing is insane. Your trucks come back to center every time.
How should skateboard bushings fit?
Do skateboards come with grip tape on them?
Do skateboards come with griptape? If you buy a complete (a fully assembled and ready to ride skateboard) it will have to come with griptape already applied to it. You cannot assemble a skateboard until after the griptape is on the deck. If you did you would cover up the bolt heads.
What is a pivot cup?
Pivot cups are a urethane cushion (usually a "cup" shape) between the "pivot point" of your truck's hanger and the baseplate itself.
How tight should skateboard trucks be?
Your trucks should be loose enough that you don't need to tic-tac to get around obstacles while skating around. Skateboard trucks can be set tight or loose, depending on the rider's preference. That being said, they should be tight enough that the kingpin won't fall out and loose enough that the bushings don't burst.
How many bearings does a skateboard need?
Every skateboard wheel is equipped with two bearings. If you want, you can fill the space between them with a spacer. This small metal cylinder prevents the bearings from being forced into the centre of the wheels when tightening the axle nut and getting damaged.
When should kingpins be replaced?
The good news is the kingpins have a life of 750,000 miles, so with good maintenance they would only need to be replaced once during a truck's lifetime,” said Duane Rasmussen, Instructor, Medium/Heavy Truck Technology, Hennepin Technical College.
Which is better rubber or polyurethane bushings?
Ride Quality: Because rubber is softer than polyurethane, it's much better at warding off road noise and vibrations. This means that rubber bushings make for a much smoother ride. They're also a lot more prone to damage from oil, UV, road chemicals, and heat.
Are Powerflex bushings good?
If you have been considering upgrading your car to polyurethane bushings I can definitely recommend you go the Powerflex Bushings route. Not only did I find an increase in precision and tightness in my suspension, but the levels of noise, vibration and harshness are much better than just acceptable.
Is polyurethane better than rubber?
In the case of tires, seals, and some belts, rubber is the best material. In the case of bushings, spacers, and high load components, polyurethane is the better choice. Polyurethane has higher abrasion, cut, and tear resistance. It can be made in a higher hardness rating and it has better load bearing capacity.
What are double kingpin trucks good for?
double kingpin = smoothest response (extra fluid turning)
Tightening or loosing this bolt compresses or de-compresses the bushing of the truck causing tighter or looser feel to the ride. The direction that the kingpin is mounted to the baseplate has a direct effect on the way the truck turns.
What is the point for washers in a skateboard?
Speed washers increase speed and promote longer bearing life by reducing friction between the bearing and axle nut and hangar. They also help to protect your bearings from dirt and debris.
Do longboards use different bearings?
You need good quality longboard bearings to ride with precision, speed, long spin duration and to truly enjoy your ride. Longboards and skateboards use the same bearings, but you can get a larger spacer for larger longboard wheels.
Are bones bushings any good?
The Bones bushings always went back to center. I also found much more stability while carving, which has allowed me to loosen my trucks up a bit over time. I've been using the Bones Bushing for about eight months and the still ride amazing and show no signs of wear.
Do Bones bushings break in?
Re: do i really need to break in bones medium bushings? They'll break in.
Where are ace skateboard trucks made?
Ace trucks are made at our state-of-the-art factory in China.
What are Gullwing trucks?
About Gullwing Trucks
Gullwing designs skateboard trucks for traditional skateboards and longboards. They have a variety of models that are made to take on specific riding conditions. Known for its remarkable durability, the Gullwing Charger model was created for boarding across rough terrain.
Is it normal for my skateboard to squeak?
When you get friction in that spot from putting a lot of pressure on the baseplates by heavy turning, it can start to squeak. The best way to eliminate this annoying noise is by taking a few shavings of bar soap or wax and dropping them into the empty pivot cup (make sure you take your hanger out first).
How good are Slant trucks?
Slant longboard trucks are extremely strong and lightweight. If you are a committed longboarder, then you need to stick with a brand that specializes in longboard equipment. Slant makes high quality longboard trucks that will outlast other brands for years to come!
How do you fit bone bushings?
What bushings come with thunder trucks?
Thunder Rebuild Kit Includes:
What bushings come with Independent Trucks?
To give you a feel for which durometer to go for, Independent Trucks come built with the Medium Orange 90A bushings. So go harder or softer than that depending on what you want.
How do you break in new bushings?
Spend your first few skate sessions either skating on flat ground or basic riding in a mini ramp. Adjust the trucks after a few days of breaking in the new bushings. As soon as your board starts to feel normal—no tightness or awkward pulling off to one side—tighten the trucks as you would normally ride them.
Why are my bushings cracked?
They wear and crack from friction, age, heat, exposure to road salt and lubricants, and the stress of frequent movement and weight loads. Like the cartilage that protects knees and elbows, when bushings wear, it puts more stress on the joints and connected parts.
How often should you change your skateboard wheels?
You can swap your wheels around about every 2 or 3 months, depending on how often you ride your skateboard. Rotating or swapping your wheels will increase prolong lifespan and your wheels will wear out more evenly. Place your left rear on your right front. Your right rear should go to your left front.
Can you skate without griptape?
How do you grip a skateboard perfectly?
How do you get rid of air bubbles on a skateboard?
What size trucks do penny boards have?
The Original Penny Board comes with a 22-inch long deck, which is 5 inches shorter than that of the Nickel Board. The deck is 5 inches wide for the Penny and 6 inches for the Nickel. Furthermore, the Original Penny is designed with 3.125-inch trucks, which are a little bigger on the Nickel at 4 inches.
What do skateboard pivot cups do?
Pivot Cups in Action
Depending on a truck's design, skateboard pivot cups can be used to accomplish several things. They are used for the obvious - to provide a pivot point for turning - and they can also provide an end point and act as “thrust” bearing, keeping the king pin centered in the hanger.