A Rhino liner is a hardened plastic mold installed on the bed of a pickup truck for added protection against the elements and everyday use. Most basic liners come in black, but some owners wish to change the color to match the truck. The process takes just a few hours.

Does Rhino bed liner come in colors?

Yes, Rhino Linings protective coating can be sprayed in virtually any color you'd like. We can even custom pigment to match your color specifications.

What color of bed liner is available?

BlackRolling CoalMedium Quartz Gray
NardontLight Quartz GrayDoomsday
Gray MatterJust StonedCloudy Daze
HypochromicTooth FairyNuclear Winter
Brown Eyed GirlJeep SpiceDesert Sand

How do you add color to Rhino liner?

  • Smooth out the Rhino liner using sandpaper.
  • Wash the surface with an all-purpose cleaner.
  • Cover the specific areas of the liner you do not want to paint with painter's tape.
  • Lay the tarp out and place the liner on top.
  • Load the paint into the spray gun.
  • Related Question what colors does rhino liner come in

    Can you paint over Durabak?

    Durabak can always be applied over itself, whether you're looking to smooth out the texture with the smooth Durabak, or interested in changing the color, you can simply add 1 or 2 coats over the existing Durabak. The required surface prep, will depend on when the previous coat was applied.

    Can you spray over bedliner?

    You can spray the whole truck with it and then sand it real lightly to remove most of the texture before top coating and it gives it a nice hammered look/texture. I've been prepping mine all week and started spraying it today. I'll finish it up tomorrow and post some pics of the process and results.

    How can I make my Rhino liner shiny?

    Wash it as you would the rest of your vehicle, or just hose it out with water. You may pressure wash or pre-treat with a detergent and a brush for heavy soil. Do not use silicon-based products on your lining, as they will reduce its skid resistance.

    How do I clean my truck bed liner?

  • Spray the bed liner. At this point, use a water sprayer to clean your liner.
  • Wash the bed Altogether. Once you have dirt washed out, use a cleaner to wash your bed liner.
  • Rinse and dry the liner. Use the pressure washer or water spray to rinse off the liner.
  • How much does it cost to rhino line a whole car?

    Overall, it will cost you about $4,000 to Rhino Line your entire truck. The typical range is between $3,000 to $5,000. These costs will differ depending on your mechanic's location and the make/model of your car. You may also have to pay for any prep work before applying the liner.

    How much does it cost to Rhino Line the bottom of a truck?

    Wondering what a Rhino liner install costs? We conducted a national survey of Line-X and Rhino Liner installers and we learned that the national average install price is $470.41. That's nearly $100 more than a DualLiner (which, for the record, does a better job of protecting your truck bed).

    How long does Rhino liner take to install?

    A professionally installed Rhino Linings typically takes about 3 hours. Check with your local dealer, but you can normally drop it off in the morning and be ready to go that afternoon. Can I use my truck right away? Yes, Rhino Linings dries to the touch in just seconds.

    What Colours do Raptor paint come in?

    Colours: White, Black and Tintable.

  • 1 Litre covers approximately 3 square metres (two coats)
  • One 4 Litre kit will cover a 1.9 metre ute bed.
  • Two 4 Litre kits will coat an average 4 x 4 vehicle body.
  • What color is Tintable Raptor liner?

    tintable comes as a white version you can actually just buy paint pigment at your local paint store and tint it any color you want..

    How do you remove Durabak?

    If you are using a Durabak liner, apply a urethane remover such as Peel Away. Put the thinner onto the liner and let it soak for about 10 to 15 minutes. This will soften the bond and make the material easier to scrape off.

    Does Durabak need primer?

    Durabak Depot recommends that a small area be pre-tested with and without primer. On applications of extreme wear, such as step nosings, a primer is highly recommended. CAUTION! When priming metal surfaces, the primer must be fully dry before overcoating.

    Is Durabak any good?

    Durabak was a clear cut winner in our side by side comparison with Lava-liner. While the Lava-liner also durable and resistant to abuse, they weren't as easy to apply and the finished product didn't look as good. See our installation page for a complete install of this great product.

    How many coats of Herculiner should I put on?

    BRUSH APPLICATION

    HERCULINER can be applied with a soft paint brush in two coats at right angles to one another. (HERCULINER is not a paint, and should be laid onto the surface, in one direction, not brushed out as an oil or latex paint.) Between coats, clean brush only with recommended thinner/cleaner Xylene (Xylol).

    How do you recoat a bedliner?

    How do I make my bed liner look new?

    How do you get scratches out of a truck bed liner?

    Pour the truck bed liner material into a disposable paint tray. Dip the brush into the truck bed liner material and gently dab it over the scuffs you want to repair. If you are dealing with small fissures then let the brush hover over it to allow the material to drip between the cracks.

    How do I remove Rhino liner from my car?

    How Much Does It Cost To Fix A Car Heater
    Which Of The Following Are Examples Of Pliers?