How do you find the minimum rotor thickness?

Use a micrometer at the thinnest point on the surface of the rotor where it meets the pads to measure the minimum operational thickness. If your rotor needs to be cut or has worn passed this thickness, you'll need new rotors.

How do you know if your rotors are too thin?

When a rotor is too thin, it overheats and warps, leading to an annoying vibration or pedal pulsation. When rotors were thicker, they could take the wear from the brake pads, be machined and still have enough metal left to dissipate the heat.

Are thicker rotors better?

Increasing The Size Of Your Rotors Improves Heat Dissipation

The biggest benefit of increasing the size of your rotors is improved heat dissipation. When you use your brake rotors and pads hard (for example, at the track), they heat up faster. As a result, these parts will have a hard time cooling down.

Related Question What is the minimum thickness for a brake rotor?

How thick are BMW rotors?

Need to buy parts for this project? Click here to order!

Brake rotor minimum thicknessFrontRear
E90 Normally-aspirated18.4mm (0.72 in)22.4mm (0.72 in)
E90 Turbocharged28.4mm (1.1 in)24.4mm (0.96 in)

What will excessive rotor thickness variation cause?

For example, excessive DTV is the leading cause of high speed pulsation complaints. Likewise, DTV is typically more pronounced when stopping from speeds above 35mph. This is caused by the changing thickness of the rotor thus causing the caliper piston to move in and out.

How do you read brake rotor thickness?

Do brake rotors get thin?

Rotors get too thin, not only because they are thinner to begin with, but due to other factors. If you tend to “ride the brakes”, your brake system will receive undue abuse - excessive heat, premature pad wear, and rotor wear.

Can you put old pads on new rotors?

When a set of pads is worn out and need to be replaced, it is perfectly ok to install a new set of pads on the old rotors. The fact that a layer from the old pads has “contaminated” the surface of the rotor means little once the new pads are bed in.

What is the best material for rotors?

Brake rotors are usually constructed from cast iron. This is an adequate material, but it's also the heaviest. Another material used is steel or layered steel. Steel rotors are lighter and dissipate heat better than cast iron.

What is a good quality brake rotor?

  • Editor's Pick: ACDelco Professional Brake Rotor.
  • Bosch QuietCast Rotor.
  • ACDelco Advantage Non-Coated Rotor.
  • DuraGo Premium Electrophoretic Brake Rotor.
  • DuraGo Vented Disc Brake Rotor.
  • Centric Parts Premium Brake Rotor.
  • Wagner Premium E-Coated Brake Rotor.
  • Is 2mm on brakes bad?

    you are going to replace pad and rotor anyway so it does not matter. even if you are only going to replace pad you should be ok. I have read that OEM pads are 14mm when new, so if 12mm got you 30K miles, 2mm should last 5K. I've noticed rears wear faster on this car.

    Can Brembo rotors be resurfaced?

    The bottom line is if you can't feel a pedal pulsation, the rotors are probably okay. But if there is a pulsation, you can usually assume the rotor is warped or has variations in thickness and needs to be resurfaced or replaced. Since you have Brembo brakes, you can easily change the pads yourself.

    How thin should brake pads be before replacing?

    Most pads start their life with about 12 mm of friction material, and most mechanics suggest replacing them when they get to 3 or 4 mm. You should replace your car's brake pads before the backing plate begins gouging out the brake rotors — a complication that can make the job even more expensive.

    What is different about pressure bleeding a brake system when the master cylinder has a plastic reservoir?

    What is the different about pressure bleeding a brake system when the master cylinder has a plastic reservoir? This could cause a dangerous brake pull.

    Why do you need new rotors?

    Like brake pads, brake rotors wear out over time. If they are thinner than the manufacturer's recommended thickness, then you need to replace your brake rotors immediately. Some vehicles always require new pads and rotors because the rotors cannot be resurfaced.

    Is The EGR Valve Part Of The EVAP System?
    Can I Clean My Fuel Injectors Instead Of Replacing Them?