The standard Imperial sizes of square drives includes 1/4″, 3/8″, 1/2″, 3/4″, 1″, 1-1/2 “, 2-1/2 “, & 3-1/2 “. Though there are a few other less common sizes, 1/4” is ultimately the smallest. Thus, the smallest socket sizes are only available in this drive size.
What sizes do socket drives come in?
These drive fittings come in four common sizes: 1⁄4 inch, 3⁄8 inch, 1⁄2 inch, and 3⁄4 inch (referred to as "drives", as in " 3⁄8 drive").
What are the three basic drive sizes for sockets?
Common ratchet sizes include 1/4-inch drive, 1/2-inch drive and 3/8-inch drive. Having different socket wrench sizes will allow you to operate different socket sizes based on your particular needs.
What are the most common socket sizes?
Based on my experiences, 3/8''-3/4″ (SAE) and 10mm-19mm (metric) are generally the most commonly used socket sizes in your garage. The most common of all is 3/8” and 10mm.
Related Question What is the smallest socket drive?
What size is smaller than 7 16?
Metric / Standard Wrench Conversion Chart
What can I use instead of socket wrench?
What to Use if You Don't Have a Wrench
What does half inch drive mean?
1/2 inch - 1/2" sockets are generally used for nuts and bolts from around 10mm and up. A 1/2" drive socket can apply enough force to undo all nuts on a car. There are also 3/4" and 1" ratchets but these are used on trucks, tanks and industrial machinery.
What is torque wrench drive size?
Torque wrenches are primarily referred to by the socket drive size. Like ratchet wrenches, they come in 1/4-inch, 3/8-inch, 1/2-inch and 3/4-inch drives. The bigger the drive and the longer the handle, the more torque they can deliver.
What size is a 10mm socket?
SAE to Metric Conversion Chart
What are the 2 main types of sockets?
What are the different types of socket?
What is a hexagon socket?
A “hex” socket—short for “hexagonal”—is a socket that fits around a hexagonal (six sided) nut or bolt head. There are two types of hex sockets - six point and twelve point. The six-point hex socket has six points (angles) inside the bolt end, making a perfectly even hexagon.
What socket is smaller than 9 32?
Six Point Standard Sockets (5/32, 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2)
Do they make a 6.5 mm socket?
SK Hand Tool 765 6.5mm Standard Drive Socket Turbo, 1/4-Inch.
What's smaller than 5/16 drill bit?
|Drill Bit Hole Diameters|
|Metric Size||Fractional Size|
What is 3mm in inches fraction?
Millimeters to inches conversion table
|Millimeters (mm)||Inches (") (decimal)||Inches (") (fraction)|
|3 mm||0.1181 ″||1/8 ″|
|4 mm||0.1575 ″||5/32 ″|
|5 mm||0.1969 ″||13/64 ″|
|6 mm||0.2362 ″||15/64 ″|
Will a 1.4 socket fit a 32mm nut?
FYI: 32mm and 1 1/4 wrench are the same.
Is 7/16 same as 11mm?
11mm = almost 7/16 inch. 16mm = 5/8 inch.
What is smaller 8mm or 10mm?
The 8mm is a smaller ring diameter, and the 10mm is a bigger ring diameter.
How do you get nuts off without a wrench?
Is a ratchet the same as socket wrench?
Wrenches. Ratchets and sockets are among the different types of wrenches designed for specific tasks. They perform the same functions as a conventional wrench — tightening and loosening fasteners. However, there are some tasks that suit a ratchet and socket particularly well.
What is socket size drive?
The drive socket size is a measurement of the distance between the flat sides of the square recess. The drive socket size must match the drive square size of your turning tool for the socket to fit correctly. For example, a 1/4″ drive or 1/4″ square drive will attach to a turning tool that has a 1/4″ drive square.
What are the different types of sockets?
Top 10 Types of Sockets
Is there a 10.5 mm socket?
Registered. Tried the 12pt 10mm, couldn't get it on, but thanks for the tip
What size socket is between 10mm and 11mm?
Standard / Metric Wrench Conversion Chart
What can I use instead of a 10mm socket?
So what is a 10mm socket equivalent? The equivalent imperial size of a 10mm socket is a 3/8 socket. Imperial sizes are known as SAE (Society of Automotive Engineers) or Standard. Metric sizes, also known as SI (Système International), from the French International System.
What size bolt does a 1/2 inch wrench fit?
US Bolt Head/Wrench Size
|Bolt Diameter||Head and Wrench Size|
|Hex Bolt - Lag Bolt - Square Bolt||Heavy Hex Bolt|
Is M10 the same as 10mm?
If the size is M10 x 25, that would mean that the diameter is 10 mm. The 25 indicated a length of 25 mm. A matching nut would be labeled M10, which also doesn't require a thread pitch since it's a course thread fastener.
What socket is between 9mm and 10mm?
Wrench Size And Conversion Table
|0.344||11/32 AF; 1/8 Wworth|