It weighs 39 lbs, has a max load of 2535 lbs, a maximum air pressure of 44 psi, a tread depth of 12/32" and should be used on a rim width of 7.5-9.5". See all Defender LTX M/S tire sizes Write a Review Similar 275/55R20 Tires
How much tread is on a new Michelin tire?
A new tire starts out with about 10/32 inch of tread, and gradually wears down from there. When the tread depth hits 2/32 inch, it is legally worn out, and must be replaced.
What is the tread depth on a brand new tire?
New tires have an average tread depth of 8 to 9 millimeters (10/32 to 11/32 inches). As you drive, the tread will wear down. A tire with a tread depth below 1.6 millimeters (2/32 inches) lacks grip. Braking distance and vehicle control are impaired.
How many miles do you get out of Michelin defender tires?
Michelin rates the Defender for tire wear at 90,000 miles. They say the tire delivers this type of mileage because of the way their trademarked MaxTouch Construction combines with the interlocking action of their Breakthrough IntelliSipe technology to provide “exceptional tread block rigidity” and extra-long life.
Related Question What is the tread depth of a new MICHELIN Defender tire?
What is the minimum tread depth for front tires for other tires?
You absolutely must memorize that the front tires (steer tires) need at least 4/32-inch tread depth in every major groove. All other tires (drive tires, trailer tires, etc) must have at least 2/32-inch tread depth in every major groove.
Are Michelin defenders worth the money?
Michelin stands behind the Defender with a 90,000 mile tread warranty. The Defender has a number of good points including a very quiet ride quality to go along with impressive dry and wet traction. Overall, Michelin has a very good all-season tire in the Defender, although there is room for improvement.
Are Michelin Defenders good in snow?
Handling & Weather
The Michelin Defender performs extremely well in dry conditions. Cornering is tight, and the tires perform well in highway driving. That being said, the tires perform fairly well in wet and snow conditions. Like most all-season tires, they will always be out-performed by winters.
Are Michelin Defender tires quiet?
6 – Michelin Defender
As a new tire in 2012, the Michelin Defender is making its mark as an all-around high performing all-season tire. One very nice benefit you'll also find with this tire is how quiet the ride is. Michelin has tuned the tread pattern to optimize ride comfort and quietness.
How do you check the tread on a Michelin tire?
Is the Michelin Defender an all-season tire?
An all-season tire suitable for many family cars, small SUV's and light duty trucks. The Defender has an impressive 90,000 mile warranty, in-line with the wear potential determined by Consumer Reports own test results.
What is the difference between Michelin defender and defender th?
Defender T+H tires utilize a new, all-season tread compound focused on improving durability and longevity compared to the previous-generation Defender. Internally, two wide steel belts are reinforced by a single ply of polyamide to stabilize the tread, improving steering response and tire life.
How many miles do Michelin last?
In general, Michelin tires should last between 45,000 and 85,000 miles (or 5-10 years). However, the mileage you get from your Michelin tires depends on many variables such as road conditions, driving habits, and proper maintenance like keeping your tires properly inflated.
Should I change my tyres at 3mm?
One of the key conclusions of the research was: “Replace your tyres soon after the tread depth reaches 3mm. Always change them once the tread has worn down to 2mm or less at any point.” Several vehicle manufacturers also recommend 3mm as the standard changeover point.
Should I replace my tires at 3mm?
The manufacturer says there is no link between tread depths at 1.6mm and increasing accident rates. In addition, changing tyres at 3mm would cost the motorist money and increase carbon emissions – especially as a tyre becomes more fuel-efficient as it wears.
Is 9/32 A good tire tread depth?
New tires typically come with 10/32” or 11/32” tread depths, and some truck, SUV and winter tires may have deeper tread depths than other models. The U.S. Department of Transportation recommends replacing tires when they reach 2/32”, and many states legally require tires to be replaced at this depth.
How long does it take to wear 1/32 of a tire?
Depending on the tread compound, the tread will wear down about 1/32 inch for every 5,000 to 8,500 miles of normal driving. Consequently, a new set of tires may last 40,000 to 70,000 miles on average.
Is 80 percent tire tread good?
Here's what the heck that means: 2/32nds of tread is the legal minimum of tread you need on your tires to pass inspection in most states. Most tires have 10/32nds of tread when new, and when 80 percent of the tread has worn down, or its reached 2/32nds, it's time for new tires.
What is a safe tread depth?
Good tire tread depth will be 6/32 or deeper. If the depth is 4/32, you should start thinking of replacing your tires and getting new ones. 2/32 or less means that you should change your tires ASAP. The amount of tire tread can affect your stopping distance, making a drive in wet or snowy conditions more dangerous.
What MM should tires be replaced?
Fast facts: When to replace tires
You must replace tires when the tread depth falls below 1.6 mm, which is the legal limit. Continental recommends changing summer tires at 3 mm and winter tires at 4 mm tread depth; after this point safety and performance characteristics are not optimal.
Is 7mm tread good?
Depending on their type, new tires have a tread depth of between 7 mm and 9.5 mm. This ensures the best performance in changing conditions. While the minimum legal tread depth for all passenger car tires in Europe is 1.6 mm, it is safer to replace them at a depth of 2 mm at least.
What is the minimum tread depth allowed by DOT for?
FMCSA regulation
According to Federal Motor Carrier Safety Administration (FMCSA) regulations, the minimum tread depth for a steer tire is 4/32 of an inch on every major tread groove. If one spot on one groove is less than 4/32, then a driver will be issued a citation.
What is the minimum acceptable tread depth of tires?
The minimum legal limit is 2/32 of an inch. This doesn't mean that tires are perfectly safe if they have 3/32 left of tread. This is simply the limit at which you won't pass your state safety inspection. Your tires become incrementally less safe as the tread wears down.
What is the minimum tread depth for dot?
Per code section 393.75 (c), “tires shall have a tread groove pattern depth of at least 2/32 of an inch when measured in a major tread groove.” It also states that measurements can't be taken “where tie bars, humps, or fillets are located.” DOT steer tire regulations state that depth is at least 4/32 of an inch.
What does the T H mean on tires?
This letter denotes the maximum sustainable speed and is found directly after the load index. For S-speed-rated tires, it's 112 mph; for T, 118 mph. Speed ratings for other tires include Q, 99 mph; H, 130 mph; and V , 149 mph. Some tires have speed ratings of W, 168 mph and Y, 186 mph.
Is Michelin really the best tire?
When it comes to the best tire brands, we chose Michelin as number one for many reasons. Most prominently, our decision came down to the well-balanced performance with incredibly low risk factors.
Are Michelin Defender tires directional?
The Verdict: Michelin Defender XT Tires are NOT Directional. I called and learned that my Defender XT tires are not directional and it doesn't make a bit of difference if they cross rotated my tires.
Why are my Michelin tires so noisy?
The tire, noise maker
A tread design made up of short, repetitive patterns will generate a whine. In the grooves of the tread in contact with the road surface, air is successively imprisoned compressed and then released.