The most common cause for the airbag light coming on is that the airbag system is deactivated or turned off. There may be a few reasons for this which you had no control over. There may be an issue with a crash sensor, SRS module, or other airbag component.

Why does my airbag light come on and off randomly?

When the airbag light turns on, this means that the airbag system is not properly functioning. If your vehicle—and airbag system—is working properly, the light should remain off. Or, in some vehicles, it may turn on for a few seconds along with all other displays and then immediately dim out. This is normal.

How do I reset my airbag light?

  • Put the key into the ignition and turn the switch to the "on" position.
  • Watch for the airbag light to turn on. It will stay illuminated for seven seconds and then shut itself off. After it shuts off, immediately turn the switch off and wait three seconds.
  • Repeat Steps 1 and 2 two more times.
  • What makes airbag light come on?

    The most common cause for the airbag light coming on is that the airbag system is deactivated or turned off. There may be an issue with a crash sensor, SRS module, or other airbag component. Alternatively, the sensor in the passenger seat that determines whether that airbag should be active or not may be faulty.

    Related Question why does my airbag light keep coming on and off

    Can you sell a car with the airbag light on?

    You can sell it, but if someone asks about the airbag light, you should tell them what you know about it.

    What does it mean when your car says service airbag system?

    The service airbag light comes on to indicate there's a problem with a vehicle's airbag system. A problem with the airbag system also means, should there be an accident, the airbags will not be able to properly deploy or may not deploy at all. So in that case a service airbag light coming on is a serious issue.

    Can you clear airbag codes?

    No, scanners cannot clear these codes. These codes are stored after a vehicle accident and are also known as crash data. Also, these codes are hardware issue codes. Hard Codes require professional reset services like us.

    What scanner will reset airbag light?

    An OBD2 scanner is a tool that is connected to the OBD2 port in your car. It diagnoses the car's system and hits up with a trouble code that defines what the problem is. However, you need to buy an OBD2 scanner that is capable of reading SRS light codes and resetting it. There are many OBD2 scanners on the market.

    Will bad clock spring deploy airbags?

    Get the clock spring replaced or your air bag may not deploy if you need it. Leave this job to a professional. Unless you have the right tools and know how to disable the air bag before you start digging into the steering column, you'll get in trouble.

    What Is An Oil Filter Socket?
    How To Test A Speedometer